|

|
For measuring liquid level in aboveground storage tanks. Gauge mounts on top of tank and
is activated by a float connected to cable. Readout is on a 12-hour clock face.
CLICK HERE FOR 818 PDF
|
|

|
Utilizes the Fig. 818 style Clock Gauge with a built-in high level warning alarm. Contains
a battery powered, intrinsically safe, alarm unit that is mounted remote from gauge. Alarm is set for desired level during
installation and can be reset at any time for a change in alarm level requirements
CLICK HERE FOR 918SERIES PDF
|
|

|
The 918 TCP provides an audible alarm for either a high or low level
warning. The system incorporates an alarm box and a single-point level sensor. The alarm box is UL Listed.
The alarm box is a weatherproof, intrinsically safe, 90 decibel alarm that operates
on two 9-volt batteries. It features a membrane-type test/cancel button.
The single point level sensor is designed for tanks up to 35’ tall. This
rugged sensor is immersed in the tank through a 2" NPT female opening and is supported by a nylon liquid tight fitting, Teflon
tubing and wire. The float and weight are stainless steel, making it ideal for almost any petroleum tank application.
The order length should be equal to the distance from the top of the 2" tank
opening to the desired activation level.
CLICK HERE FOR 918TCP PDF
|
|

|
The Fig. 1018 Mechanical AST Gauge is designed for use on aboveground storage tanks. This
quality gauge provides a convenient and economical solution to inventory management needs. The standard gauge unit can be
calibrated for tanks up to 35 ft. in height, eliminating costly custom probe lengths used in other gauging systems.
|
|

|
Used for measuring liquid level in aboveground storage tanks. Best suited for vertical tanks
over 12 ft high. Gauge readout by tape which passes over an indicator mounted at 3 ft height on the side of the tank. Activated
mechanically by a float that rests on the liquid level. Float is connected to a cable that runs up through the top of the
tank, across two pulleys, and down the side of the tank to the indicator position.
CLICK HERE FOR 618 PDF
|
|

|
System Features
• Monitors 1 to 4 aboveground storage tanks per console. Each gauge can be located up to 1000 ft. from
the console.
• Can measure tanks up to 35 ft. in height, including vertical or horizontal cylindrical tanks and rectangular
tanks. Accurate to 0.1”.
Choose Feet-Inches, Inches or Gallons. Metric readout can also be selected as an option on the console.
• Easy-to-use software is capable of monitoring a network of 8 consoles and 32 tanks per site. Unlimited
sites can be monitored from one PC. PC can be located up to 4,000 ft. from the console.
• Includes Windows XP compatible software for PC communication to console.
• Each gauge is numbered for visible tank identification. They are equipped with a mechanical readout
of tank levels providing the ability to read tanks at a glance.
• A one-inch backlit LCD display allows for easy viewing from a distance, even at night. Arrows on the
display indicate the tank being read and its current status.
• The console is equipped with a rechargeable battery
backup with controllable usage of approximately 30 minutes.
• Optional 9600 baud Remote Communications Adaptor (RCA) AVAILABLE
CLICK HERE FOR 1018 PDF
|
|
| CLICK PHOTO FOR WEB PAGE |

|
OPW 200TG AST Mechanical Tank
Gauge
|
The OPW 200TG Tank Gauge is designed
for reading liquid levels in horizontal or vertical aboveground storage tanks. The 200TG Tank Gauge provides an accurate numerical
counter readout, eliminating the need for any on-site manual gauging.
CLICK HERE TO VIEW 200TG PDF
|
|

SCULLY GOLDEN GALLON GAUGE
|
Double float tank gauge for fuel oil and diesel tanks. Polypropylene float an d polyurethane coated kevlar
string. Easy to read window had UV and anti fog protection. Reads in gallons or inches of stored product.
*Specify tank depth in inches when ordering
|
|
| CLICK PHOTO FOR WEB PAGE |

|
|
The ACU Gauge is a float type sensing device good from 0"-60" deep tanks and accurate to 1/10" of an inch.
It has a 3.5 digit backlit display. The unit runs on either a nine volt lithium battery, or it can run off of the remote
unit's power source.
The display has a push button activation with a battery saving automatic shutoff.
Unit is contained within a weather proof housing. It is semi waterproof (cannot be submerged), and is good from 30 to
140 degrees Fahrenheit.
Standard auxiliary output jack with high quality gold plated connections.
CLICK HERE FOR ACU GAUGE SPEC SHEET
|
|

*OPTIONAL* Remote Unit With
High Level/Low Level Alarm
|
- The Remote Display is an optional add on that retains all of the same properties as the ACU Gauge itself.
- It also offers remote capability, wall cube power, Hi/Lo level adjustable alarms, and an optional 4-20 mA output.
|
|
| CLICK PHOTO TO SEE LARGER IMAGE |

|
Direct Reading Gauge- Liquid Level Gauge, Tank Level Gauge
|
The At-A-Glance Type D Liquid Level Gauge is a reliable, swing arm type tank gauge used for measuring all types of liquid
levels. This sight gauges simple mechanical design promotes durability, minimal upkeep, quick installation, and easy/inexpensive
repairs.
This liquid level gauge is custom made in house to fit your tank. We can accomodate any size tank from 6 inches to 12 feet
in depth, we can also account for double walls and pipe risers, and we offer multiple materials of construction to accomodate
nearly any type of liquid.
CLICK HERE FOR SPEC SHEET
|
|
| CLICK PHOTO FOR WEB PAGE |

|
*OPTIONAL* Remote Mount
Fill Alarms
|
At A Glance Direct or Remote Mount Fill Alarms- Features included on all models
- Compatible with Krueger Sentry Gauges: Type D, Type H, Type B, Type PH, Type PD, Type O, and Type K.
- Powered by a 9 volt Lithium Battery.
- Magnetic Switch triggers a 110 DB Alarm.
- Can be reset even while in alarm mode.
- Test Switch allows you to test the battery before each use.
- All Alarms come with a 9 volt Lithium Battery and Magnetic Indicator.
- Remote Alarms come with 25 feet of remote wire.
|
|
| CLICK PHOTO FOR WEB PAGE |

|
- Resists damage
- Tight seal
- Replaces red lock nut
Added durability for your liquid level gauges.
|
| CLICK PHOTO FOR WEB PAGE |

|
Gauge Guard
Part Includes:
- One Gauge Guard.
- The Guard is one solid piece of machined material.
- The standard model is made of Aluminum. It is also available in PVC.
|
| CLICK PHOTO FOR WEB PAGE |

|
"Glass" Calibration Insert
- Protects against vapor discoloration, internal heat, external heat
- Assembly sold with additional gasket
- Replaces plastic inner tube
- Specify Gauge Type When ordering
|