apt-piping.jpg

franklinfueling.jpg

pageheader.jpg

Franklin Fueling Systems Piping and Containment division offers the industry's most complete line of underground and aboveground installation products including piping, fittings, sumps and boots

CLICK HERE TO DOWNLOAD COMPLETE APT PIPING CATALOG

CLICK PHOTO WEB PAGE
xppresspip.jpg

APT Piping

The 1” size of APT piping can be used in both pressure and suction applications and are ideal for providing remote feed and fill for heaters, boilers and emergency generators. The 1”, 1” and 2” sizes of APT product piping can be used in both pressure and suction applications and are ideal for underground service station fuel delivery systems. The D series piping is a single wall direct bury piping, while the SC series piping provides additional environmental security as a secondary contained direct bury pipe. Both feature controlled flexibility, even in low temperatures, permitting fast, easy installation.

CLICK PHOTO FOR WEB PAGE
4duct.jpg

APT 4" Ducting System

The APT 4" Ducting System allows for pipe removal without extensive excavation. The 4” inside diameter of the DCT-400 ducting allows APT product piping to be easily slid through during installation or removal.

CLICK PHOTO FOR WEB PAGE
lmdisump.jpg

The Large Mouth Series Dispenser Sump

There are six polyethylene bases in three lengths and two depths. These bases have a large 22” wide by 24”, 36” or 48” long openings. The ribbed riser can be cut down in 3” increments in the field to achieve proper pipe slopes with respect to grade. A variety of large mouth tops (LMTs) are available to match nearly every dispenser model. The lids are corrosion-resistant painted steel to which shear valves and dispenser frames are mounted.

CLICK PHOTO FOR WEB PAGE
fibersump.jpg

Fiberglass Dispenser Sump

Designed for the installer, the single and double wall fiberglass dispenser sump provides easy access to piping connections. The dispenser frame and top are factory assembled and placed on the sump after piping connections are completed. Stabilizer bar kits, (SBK) for mounting emergency shear valves, are track mount design and adjust in all planes for proper alignment of the shear valve to the dispenser piping.

CLICK PHOTO FOR WEB PAGE
ffsframe.jpg

The Conduit Entry Frame for
Wayne Ovation Dispenser

This design effectively encloses the sump, protecting the area from contamination. Any leaks or spills will be kept inside the enclosure and diverted to the bottom of the sump for sensor detection.

CLICK PHOTO FOR WEB PAGE
4542sump.jpg

4542 Series

The 4542 Series one-piece tank sump is made of high-density polyethylene with a factory installed gasketed snap-on lid. The sixteen side panels allow for pipe entry from virtually any direction. The 4542 Series tank sump is available in three burial depths. Each is offered an optional inspection port (IP) for easy viewing of the interior of the sump without removal of the lid.

CLICK PHOTO FOR WEB PAGE
4736onepc.jpg

4736 Series

The 4736 Series one-piece tank sump is made of high-density polyethylene with a factory installed gasketed snap-on lid. The sixteen side panels allow for pipe entry from virtually any direction. The 4736 Series tank sump is available in three burial depths. Each is offered an optional inspection port (IP) for easy viewing of the interior of the sump without removal of the lid.

CLICK PHOTO FOR WEB PAGE
gradlevsump.jpg

AST Grade Level Sump
The AST above/below ground transition sump is the practical, environmentally sound solution for remote dispensing from aboveground storage tanks

CLICK PHOTO FOR WEB PAGE
blowgrad.jpg

APT TS-2430, TS-3630 and TS-4230
APT TS-2430, TS-3630 and TS-4230 tank sumps are ideally suited for low cost retrofits and shallow burial applications. The TS-2430 is ideal for line branching points and for containing piping splices. The 36” or 42” bases provide ample space for submersibles and fittings. The bolt-on gasket lid combination fits economically under a 30” manhole.

CLICK PHOTO FOR WEB PAGE
fiberturbsump.jpg

Watertight Fiberglass
Turbine Sump Packages

Available in both single and double wall configurations. Each package includes a patented watertight multiport sump shield. Our octagonal base sumps are a two-piece design eliminating the need to work in a confined space during installation. Eight flat panels are molded into the bottom section to provide 90 pipe entries. Most single wall models are available with or without bottom for various mounting options. Double wall models are only available for mounting to tank collar.

CLICK PHOTO FOR WEB PAGE
xpconvbox.jpg

VCF-200

VCF-200 vent box can be used along with XP-Series single wall pipe for use in venting tanks.

CLICK PHOTO FOR WEB PAGE
tnkfitadt.jpg

APT Tank Fitting Adaptors
APT tank fitting adaptors provide a high quality, cost-effective way to mount tank sumps to a standard 4” NPT tank opening or 6“ NPT tank opening

FITTINGS

CLICK PHOTO FOR WEB PAGE
xpcsswiv.jpg

XP Clamshell Swivel Pipe Fittings

These fittings are manufactured from solid brass or stainless steel with two viton O-rings protected in grooves located on the inside of the connector. Plated clamps secure the fittings to the pipe.

*Also available for P-series piping

CLICK PHOTO FOR WEB PAGE
xpcsswiv.jpg

XP Clamshell Non-Swivel Pipe Fittings

APT non-swivel pipe fittings are constructed of one piece solid brass or stainless steel to provide the same high quality and environmental security as the APT‘s swivel fittings, at a more economical price

CLICK PHOTO FOR WEB PAGE
xpswagswiv.jpg

XP Male Swage Swivel Pipe Fittings

The APT innovative swage fitting is designed with the same proven technology as our clamshell fittings. Compatible with APT 1 ”, 1 ” and 2” single and secondary containment piping using standard NPT connection fittings. Manufactured of stainless steel, the APT swage fitting is reliable, easy to install and requires no specialized connection tees or elbows.

*Also available for P-series piping

CLICK PHOTO FOR WEB PAGE
xpcstelb.jpg

XP Clamshell Non-Swivel
Tee And Elbow Pipe Fittings

Installing flexible pipe inside a narrow-base dispenser sump has never been easier. The XP clamshell non-swivel tee and elbow fittings allow for quick, space-saving installation by enabling an installer to connect flexible pipe directly into a shear valve riser, eliminating the need for extra galvanized fittings. With tee and elbow fittings, you can complete an XP pipe installation inside a sump in less than 16 inches of linear space. In addition, their stainless steel construction makes them an ideal solution for any fueling application.

CLICK PHOTO FOR WEB PAGE
galvfit.jpg

Galvanized End Connections and Fittings

One objective of APT is to utilize standard fittings whenever possible. Consequently, all APT swivel and non-swivel fittings are compatible with standard 1 “, 2“ and 2 “ NPT plumbing fittings that can be purchased in your area. However, in order to better service our customers, APT offers galvanized fittings to fit most fuel delivery applications.

INSTALLATION TOOLS

CLICK PHOTO FOR WEB PAGE
dwallcutool.jpg

Double Wall Cutting Tool

  • The DWC Cutter simplifies secondary jacket removal without causing damage to the primary pipe.
  • All double wall cutting tools are plated blue along with the letters “XP” stamped on to the body for easy identification
  • CLICK PHOTO FOR WEB PAGE
    swagemach.jpg

    Swage Machine

    The swage machine is used for installation of APT swage fittings. Competitive machines can be used provided they are modified with an APT swage kit. The machine is electrically driven, using the stainless steel fitting installed at the end of APT flex pipe. Each machine comes with the required mandrels and collars to swage all pipe sizes from 1 ” through 2”.

    Installation Tools, Sealants and Lubricants

    BPT-100

    By Pass Tube, 30” length

    BOS-103

    Bostik 1100, 10.3 ounce tube

    BTT-004

    Bulkhead Tightening Tool for 4-stud Bulkhead Boots

    BTT-008

    Bulkhead Tightening Tool for 8-stud Bulkhead Boots

    DBT-100

    De-Burring Tool

    SDT-004

    Steel Drill Template for 4-stud entry boots

    SDT-010

    Steel Drill Template for 4, 8, and 10-stud entry boots

    SLP-1000

    Sump Lid Puller for TS-4542 and TS-4736 snap-on lid

    TRK-100

    Air Test Regulator for APT secondary contained piping

    790-100-01

    Locktite 515

    BACK TO FLEXIBLE PIPING & CONTAINMENT