Red Jacket 6″ 5 HP MXP500J4-2K 230V Maxxum STP

$6,945.96$7,148.65

Red Jacket® Maxxum STP

The Red Jacket® Maxxum Submersible Turbine Pump (STP) is intended for 6” high flow applications and provides the industry’s highest flow rates. The Maxxum series boasts leading serviceability and safety features. With a 3 or 5 HP motor, it’s specifically engineered for high throughput applications such as truck stops, where extreme demand, multiple fuel points, and long piping runs reduce fuel flow to the nozzle.

Select options$6,945.96$7,525.40
Select options$9,734.00 $7,148.65
SKU: MXP500J4-2K Categories: , ,

Description

The Maxxum (formerly Big Flo) STPs and unitized motor pumps (UMP) provide the industry’s highest flow rates by reducing the number of restrictions within the flow path. The efficient design also leads to less power consumption, contributing to a lower lifetime cost of operation. Easy access to valves and ports allows for reliable diagnostics and fast service.

  • Reduced Wear – enhanced design results in quieter operation and less wear

  • Improved Insulation Rating – higher insulation temperature rating assures longer running life

  • Increased Protection – additional stainless components result in better protection for use with blended fuels

  • Backwards Compatible – Maxxum UMPs are compatible with previous 3 & 5 HP Maxxum STPs

  • Explosion Proof – improved design provides increased levels of safety; certified UL/cUL/IECEx/ATEX Explosion proof motor.

  • Continuous Safety Improvements – design enhancements guided by newer international flame proofing standards.

Alternative Fuel ready with AG compatible hardware:

  • Specialized Design – compatible with Alternate Fuels Ethanol or Methanol concentrations up to 100% and MTBE, ETBE or TAME concentrations up to 20%.

  • Certified – UL79A and UL79B for use with renewable biofuels.

Superior motor design provides higher flow rates, lower power consumption, and increased safety and reliability:

  • Up to 5% Increased Flow – Improved stator and receptacle housing design provides larger fuel paths.

  • 8% Less Power Consumption – More efficient motor design results in 8% reduction in wattage.

  • Better Quality – Red Jacket’s motor manufacturing yields improved quality, which means more station uptime than other STPs on the market.

  • Universal Compatibility – Fewer parts to stock.

  • Improved Reliability – Improved bearing design and upgraded insulation yield longer motor life.

  • Increased Safety – Maximum temperature remains ~125 degrees cooler vs. competitive models. Enhanced connectors separation meets latest flameproof standards.

Advanced packer manifold design expedites installation, simplifies service or testing, and sets the standard for Electrical and Environmental Safety:

  • Built-in Isolated Contractor’s Box – Electrical connection housing is built into the manifold and is completely isolated from the fuel path.

  • Easy to Install and Service – No adjustment required to fit yok, assembly is quick.

  • Increased Electrical Safety – Automatic electrical yoke disconnects upon removal of extractable bolts.

  • Environmentally Friendly – Automatic breaking of extractible seal upon bolt removal ensures automatic fuel drain back into tank, protecting the environment from contamination and site owners from related liability.

  • Innovative Check Valve Design – “Open” setting makes for easier line tests and servicing.

Fuel Compatibility

  • 100% diesel, fuel oil, Avgas, jet fuel or kerosene.

  • 100% Gasoline

  • All blends of automotive and similar liquid fuels including alcohol blends from 0 to 20% ethanol, 0 to 20% methanol, 20% MTBE, ETBE or TAME with 80% gasoline as well as

Motor Sizing

  • 3 HP, 60 HZ, 3-phase

  • 5 HP, 60 HZ, 3-phase

Hardware Construction

  • 1) Packer/Manifold Head: Gray Cast Iron

  • 2) Elastomers -“O” Rings: Fluorocarbon

  • 3) Check Valve Seat: Brass

  • 4) Column Pipe 3”: Schedule 40 Black Steel Pipe

  • 5) Conduit Pipe 3/4″: Aluminum or Steel

  • 6) Discharge Head: Gray Cast Iron

  • 7) Riser Pipe 6”: Schedule 40 Black Steel Pipe with Welded Flange incorporating ¾-10 UNC-2B Threads Located on a 9.5” Bolt Circle

  • 8) Outer Shell: Steel

  • 9) Stator Shell: Stainless Steel

  • 10) Pump Shaft: Stainless Steel

  • 11) Diffusers: 3HP – Celcon® (Acetal) Plastic 5HP – Cast Iron

  • 12) Impellers: 3HP & 5HP – Aluminum

  • 13) Motor Bearings: Carbon

  • 14) Motor Shaft: Stainless Steel journals & extension

Operation Environment

  • Rated for operation between -20°F (-29°C) and 105°F (40.5°C) in non-gelling petroleum products.

  • Listed under UL 79 for operation between -20°F (-29°C) and 125°F (52°C) ambient environment

  • Maximum liquid viscosity : 70 SSU @ 60°F (15°C).

Installation Depth Range

Up to 20′

Packer Manifold Access Ports

Siphon Ports:

  • 1 available, 1/4″ NPT

Line Test Ports:

  • 1 available, 1/4″ NPT

Pressure Port:

  • 1 available, 1″ NPT

Clean out Ports

  • 2 available, various sizes

Check Valve

  • Built-in line check valve, pressure relief valve, 2” NPT port for electronic line leak detection

Agency

UL Listings:

  • 100% Diesel

  • 100% Gasoline

  • Gasoline and up to: 10% Ethanol, 15% Methanol, 20% MTBE, 20% ETBE, 20% TAME

Other Agency Listings:

  • cUL

Additional information

Weight 125 lbs
Dimensions 96 × 36 × 18 in

Reviews

There are no reviews yet.

Be the first to review “Red Jacket 6″ 5 HP MXP500J4-2K 230V Maxxum STP”