| Suction | 1″ (25 mm) |
| Discharge | 1″ (25 mm) |
| Casing | Cast Iron |
| Impeller/Rotor | Ductile Iron |
| Seal Material | Mechanical or Packing |
| Flange | NPT |
| Drive Type | Electric Motor |
PUMP SPECIFICATIONS
PUMP SPECIFICATIONS
- Basic Construction: Gray Iron.
- Rotor and Idler: High Strength Iron.
- Bushings: Carbon Graphite.
- Idler Pin: Hardened Steel.
- Seal: Type 21, Mechanical Self Lubricated. Carbon Rotating Face. Ceramic Stationary Face. Fluorocarbon elastomers (DuPont Viton or Equivalent).
- Maximum Temperature of Liquid Pumped 300°F (149°C).
- Gaskets: Synthetic Fiber w/Nitrile Binder.
- O‐Rings: Fluorocarbon (DuPont Viton or Equivalent).
- Pressure Relief Valve: Ductile Iron.
- Pressure Setting: 75 PSI (5 BAR).
- Motor Speed: 1750 RPM.
- Rotation: Clockwise.




