A unique application of pressure-driven pumping, the Red Jacket DEF Pump moves the motor from the tank to the sump space, making for hassle-free service to minimize disruption.
The complete Red Jacket® DEF Pump System is comprised of 3 kits:
A pump kit, based on needed pump length, which includes a pump, mounting flange, return pipe, gasket, O-rings, circlip, cover, spider, flange adapters, 5/8″ stainless steel bolt/nut/washer kit, anti-seize, and a manual.
A motor kit, based on needed voltage, includes a motor, lifting hook, thermal overload, splash drains, mounting kit, hardware, coupling, set-point gauge, and a manual.
A manifold kit, Includes a manifold, pressure relief valve, check valve, pressure gauge, tri-clamps, gaskets, tri-clamp to 2″ MNPT adapter, and a manual.
Pair this pump with a magnetic starter and heater combination for seamless motor activation control and thermal protection.
Unique design with motor above tank and removed from flow path delivers 2X more flow than other pressurized DEF pumps above 7 fueling points, contributing to greater than 55% more flow overall.
Stainless steel shaft and core encased in polypropylene provides the optimal balance of structural integrity, corrosion resistance and weight.
Advanced motor engineered to handle more than 30 start/stop cycles per hour for busy sites.
Two thermal overloads provide additional motor protection.
Locating the motor above and outside of the DEF tank eliminates the need to open the tank or break hydraulics during service, saving time and avoiding DEF spillage onto forecourt.
Integrated check valve can be locked down for line tests and service and lifted to drain non-isolated product back into the tank.
Motor does not come into contact with DEF, avoiding risk of overheating or contaminating precise DEF solution.
Avoids opening the tank during motor service, preventing debris or water from entering.
Pump has redundant seals to help prevent DEF contamination.
Pressure management with built-in pressure relief prevents premature nozzle shut-off by maintaining safe line pressures and enables continuous run without motor failure.
Meets ISO 22241 standards for DEF compatibility
Integrates with Veeder-Root® Automatic Tank Gauge, Mag Sump Sensor and Alternative Fluids Probe.
*consisting of 32.5% urea and 67.5% de-ionized water
Line Pressure Relief
Return Pipe (Included with Pump): Polypropylene
Shaft: Stainless Steel
Core Structure: Stainless steel shielded in Polypropylene
Pump Flange: Polypropylene with EPDM Gasket
Manifold Kit: Stainless Steel with EPDM Gaskets
8’ Tank Standard
10’ Tank Standard
* Minimum 4” clearance from pump bottom to tank bottom
Check Valve Compatibility
Vertical Immersion Pressure Pump with Impellers Model DEF640
Storage Temperature Range
-22F to +122F (-30C to +50C)
Tank Flange Interface
10” ANSI Flange opening required with minimum 10” ID
8 or 12 bolt-pattern compatible
5/8” or 7/8” bolt dimension compatible (5/8” stainless steel fastener set supplied)
Pump Flange Dimensions
Included with pump
16” OD Reference
Minimum 4” liquid submersion from pump bottom Note: pump cannot run dry or warranty will be invalidated
55-60lbs for 8’ and 10’ standard lengths
Weights for other lengths will vary
Not field serviceable
Rated Speed: 3450 RPM
Continuous duty, greater than 30 start/stop cycles per hour
Vertical Height: 19” Reference
Diameter: 12” Reference
Special Application Features
Drip Cover, Moisture Drains, Integral Thermal Overloads
Motor is not to be operated immersed in liquid (must ensure positive motor/pump shut-off by Mag Sump Sensor)
108lbs, lifting hooks included
Not field serviceable
For use with magnetic starter VR Part No: 410648-001/003 depending on voltage, and 3 heaters VR Part No: 410649-003/009/011 depending on voltage