, , ,

Gorman-Rupp VGH1 1/2C31-B 2.5″ x 1.5″ Standard Centrifugal Pump

$4,975.00

Suction 2-1/2″ (60 mm)
Discharge 1-1/2″ (40 mm)
Solids Handling 0.27″ (7 mm)
Casing Ductile Iron
Impeller/Rotor Cast Iron
Seal Material Silicon Carbide
Flange ASA
Drive Type Basic
Unit Weight 111 lbs
Minus Quantity- Plus Quantity+

Gorman-Rupp VGH Series are heavy-duty pumps used on a variety of applications, from clean fluids to dirty liquids and mild abrasives. The pumps feature a standard ductile iron casing, gray iron impeller with replaceable iron wear rings and a tungsten carbide/silicon carbide cartridge mechanical seal with fluorocarbon elastomers. VGH pumps are supplied with a heavy-duty oil lubricated bearing pedestal for V-belt driving or can be mounted to electric motors if needed.

  • Size: 2 1/2” x 1 1/2” (64 mm x 38 mm) Raised Face Flanges.
  • Casing: Ductile Iron.
  • Maximum Operating Pressure 182 psi (1255 kPa).*
  • Enclosed Type, Six Vane Impeller: Gray Iron 40.
  • Handles 17/64” (7 mm) Diameter Spherical Solids.
  • Impeller Shaft: Steel 1045.
  • Two Replaceable Wear Rings: Gray Iron 25.
  • Seal Plate: Ductile Iron.
  • Bypass Flush Piping.
  • Bearing Housing: Gray Iron 25.
  • Radial Bearing: Open Single Row Ball.
  • Thrust Bearing: Open Double Row Ball.
  • Bearing Lubrication: SAE 30 Non‐Detergent Oil.
  • Gaskets: Nitrile Rubber.
  • Hardware: Standard Plated Steel.
  • Bearing Housing Level Oiler.
Gorman Rupp VGH1 1/2C31-B Standard Centrifugal PumpGorman-Rupp VGH1 1/2C31-B 2.5″ x 1.5″ Standard Centrifugal Pump
$4,975.00
Minus Quantity- Plus Quantity+