Features & Benefits
Includes a 10 micron, 1 3/8 – 12 UNF particulate filter that removes debris from fuel that may damage your equipment
Powder coated motor can and aluminum body to prevent rust and survive all weather conditions
Drip catch – Lockable nozzle holder keeps your truck and tanks clean and stops fuel theft
Rotary gear design: fewer moving parts means less friction and wear on components, for minimal maintenance and a longer pump life
Factory-Installed power cord saves installation time
Spin collar mount makes installation and pump orientation easy – fits any 2″ NPT tank
Extended warranty coverage requires product registration with GPI. Default warranty is 2 years. Register at: gpi.net/product-registration
Quick-fit modular makes it easy to attach a meter to build your own custom system
Quick-fit modular makes it easy to attach a filter, meter or both to build your own custom system
Powder coated motor can and aluminum body to prevent rust and survive all weather conditions
Drip catch – Lockable nozzle holder keeps your truck and tanks clean and stops fuel theft
Rotary gear design: fewer moving parts means less friction and wear on components, for minimal maintenance and a longer pump life
Factory-Installed power cord saves installation time
Spin collar mount makes installation and pump orientation easy – fits any 2″ NPT tank
Extended warranty coverage requires product registration with GPI. Default warranty is 2 years. Register at: gpi.net/product-registration
Quick-Fit modular makes it easy to attach a filter, meter or both to build your own custom system
Diecast aluminum housing is lightweight – weighs 19lbs = low stress on tank
Powder coated body to prevent rust and survive all weather conditions
Drip catch – Lockable nozzle holder keeps your truck and tanks clean and stops fuel theft
Rotary gear design: fewer moving parts means less friction and wear on components, for minimal maintenance and a longer pump life
Spin collar mount makes installation and pump orientation easy – fits any 2″ NPT tank
Removable inlet strainer for easy cleaning
For ground-based refueling only. Do not use or mount in or on the aircraft. For use with aviation gasoline (AVGAS 100LL) and kerosene grade (JET A). User should consult NFPA 407 Standard for Aircraft Fuel Servicing for safety requirements during ground fuel servicing of aircraft using liquid petroleum fuels. This product has no actual or implied compliance with this standard.
Extended warranty coverage requires product registration with GPI. Default warranty is 2 years. Register at: gpi.net/product-registration
Specifications
- Max. Flow Rate:
- 20 GPM (76 L/min)
- Voltage Input:
- 12V (DC)
- Technology:
- Rotary Gear
- Amps Rated:
- 34 amps
- Duty Cycle:
- 30 min on/30 min off
- Power Cord:
- 18 ft. (5.5m), 12/2 AWG, Factory Installed
- Max. Discharge Pressure:
- 12 PSI (0.82 bar)
- Operating Temperature:
- -22° F to 131° F (-30° C to 55° C)
- Suction Lift:
- Up to 10 ft. (3 m) at Sea Level 70° F (21.1° C)
- Discharge Lift:
- Up to 15 ft. (4.5m) at Sea Level 70° F (21.1° C)
- Pump Housing Material:
- Powder Coated, Corrosion-Resistant Diecast Aluminum
- Wetted Materials:
- Acetal | Aluminum | FKM | NBR | PPS | Stainless Steel
- Mounting Type/Thread:
- Spin Collar, 2in. MNPT
- Suction Pipe:
- Polypropylene, Telescoping 15 to 40in. x 1in. MNPT
- Inlet:
- 1 in. FNPT
- Outlet:
- Modular, 1 in. FNPT
- Dispensing Hose:
- 14 ft. (5.2m) x 1 in. MNPT
- Nozzle:
- 1 in. FNPT Inlet, Automatic Shut-off, Diesel
- Nozzle Holder Type:
- Lockable
- Warranty:
- Limited Lifetime Warranty
- UPC:
- 031401012163
- Approvals:
- cULus Motor Listed for Hazardous Locations Class I, Division 2, Group D USA and Canada
- Max. Flow Rate:
- 20 GPM (76 L/min)
- Voltage Input:
- 12V (DC)
- Technology:
- Rotary Gear
- Amps Rated:
- 34 amps
- Duty Cycle:
- 30 min on/30 min off
- Power Cord:
- 18 ft. (5.5m), 12/2 AWG, Factory Installed
- Max. Discharge Pressure:
- 12 PSI (0.82 bar)
- Operating Temperature:
- -22° F to 131° F (-30° C to 55° C)
- Suction Lift:
- Up to 10 ft. (3 m) at Sea Level 70° F (21.1° C)
- Discharge Lift:
- Up to 15 ft. (4.5m) at Sea Level 70° F (21.1° C)
- Pump Housing Material:
- Powder Coated, Corrosion-Resistant Diecast Aluminum
- Wetted Materials:
- Acetal | Aluminum | FKM | NBR | PPS | Stainless Steel
- Mounting Type/Thread:
- Spin Collar, 2in. MNPT
- Suction Pipe:
- Polypropylene, Telescoping 15 to 40in. x 1in. MNPT
- Inlet:
- 1 in. FNPT
- Outlet:
- Modular, 1 in. FNPT
- Dispensing Hose:
- 14 ft. (5.2m) x 1 in. MNPT
- Nozzle:
- 1 in. FNPT Inlet, Automatic Shut-off, Diesel
- Nozzle Holder Type:
- Lockable
- Warranty:
- Limited Lifetime Warranty
- UPC:
- 031401007183
- Approvals:
- cULus Motor Listed for Hazardous Locations Class I, Division 2, Group D USA and Canada
- Max. Flow Rate:
- 20 GPM (76 L/min)
- Voltage Input:
- 12V (DC)
- Technology:
- Rotary Gear
- Amps Rated:
- 34 amps
- Duty Cycle:
- 30 min on/30 min off
- Power Cord:
- Not Included
- Max. Discharge Pressure:
- 12 PSI (0.82 bar)
- Operating Temperature:
- -22° F to 131° F (-30° C to 55° C)
- Suction Lift:
- Up to 10 ft. (3 m) at Sea Level 70° F (21.1° C)
- Discharge Lift:
- Up to 15 ft. (4.5m) at Sea Level 70° F (21.1° C)
- Pump Housing Material:
- Powder Coated, Corrosion-Resistant Diecast Aluminum
- Wetted Materials:
- Acetal | Aluminum | FKM | NBR | PPS | Stainless Steel
- Mounting Type/Thread:
- Spin Collar, 2in. MNPT
- Suction Pipe:
- Not included
- Inlet:
- 1 in. FNPT
- Outlet:
- Modular, 1 in. FNPT
- Dispensing Hose:
- Not included
- Nozzle:
- Not included
- Nozzle Holder Type:
- Lockable
- Warranty:
- Limited Lifetime Warranty
- UPC:
- 031401007169
- Approvals:
- cULus Motor Listed for Hazardous Locations Class I, Division 1, Group D USA and Canada