The Red Jacket® ISOTROL™ 1-8 Control Box isolates handle signals between each dispenser and protects against wiring shorts and phasing issues. It is available with or without a built-in 30-amp 2HP rated relay.
ISOTROL™ 1-8 units without the relay are designed for use with the TLS-450PLUS or another component for motor control – IQ, standard control box or three phase magnetic starter and will accept up to eight individual dispenser signals.
ISOTROL™ 1-8R units with the relay bypass an ATG to activate one pump and will accept up to eight individual dispenser signals. They can also be utilized to activate a second pump in manifolded applications.
Isolates the handle signals between each dispenser.
Isolates and protects individual dispensers from wiring shorts or phasing issues.
Isolates and protects technicians from dangerous feedback during service.
Ready interface with the Red Jacket® IQ Control Box and/or the TLS-450PLUS.
Compliant with NEC requirements for handle isolation.
Accepts up to eight individual dispenser signals.
If ordered without relay, it must be used with another component for motor control.
Dedicated Automatic Tank Gauge (ATG) line leak output and coil for easy compatibility with Pressurized Line Leak Detection (PLLD).
Terminals are labeled for easy wiring and compatibility.
May be used with all Red Jacket and competitive submersible turbine pumps.
Easily retrofitted to existing locations.
Dimensions | Type 1 enclosure, 6”x6”x4” |
DISP Inputs | 10 mA @120V or 240V 50/60 Hz |
Control Circuit | 15 mA @ 120V 50/60 Hz or 240V 50/60 Hz |
ATG Output | 750 mA @ 120V or 240V 50/60 Hz |
Control Relay | 30A DPST 120/240VAC 50/60 Hz |
Terminals | 250V 14-28 AWG 10-18 AWG Main |