The Retrofit-S fittings are split in two halves and bond to flat or curved wall fiberglass containment sumps as well as steel sumps. Models are available for all common piping including 1/2”, 3/4” and 1” conduit as well as fiberglass pipe from 2” through 4” diameters, including Ameron LCX coaxial pipe. Retrofit-S fittings come in two versions to better apply to pipe angles: The standard models accommodate pipe angles between 0-20° degrees. Extreme angle models accommodate angles between 20-45° degrees. All Retrofit-S fittings are kitted with all the required installation tools except the Retrofit Adhesive. Compatible with all conventional and alternative fuels.								
				Features
									Specs
							Features
					- Made in the USA (i)
 - FRP Construction / Built like a Tank (i)
 - Compatible with all fuels (i)
 - For 1/2”, 3/4” and 1” galvanized conduit
 - For 2”, 3” and 4” fiberglass pipe, including LCX coaxial
 - Single split-body design
 - Additional flange for curved sumps included
 - Accommodates either 0-20° or 20-45° degrees
 - NO failure-prone materials or components
 - Factory-machined surfaces (i)
 - Kitted: Includes installation accessories (i)
 - Includes fiberglass epoxy adhesive
 - Third Party Approved
 - 30 Year Warranty (i)
 
Specs
					- Material: Tank-spec Fiberglass (i)
 - All 0-20° models are less than 2” long.
 - 1/2”, 3/4” and 1” conduit: 5” O.D.
 - 2” and 3” pipe and LCX: 7” O.D.
 - 4” pipe and LCX: 8” O.D.
 - All 20-45° models are less than 2-1/2” long.
 - All conduit fittings: 5” O.D.
 - 1/2”, 3/4”, 1” conduit and 2” pipe: 7” O.D.
 - 3” pipe and 2” LCX: 8” O.D.
 - 4” pipe and 3” LCX: 9” O.D.
 - 4” LCX: 11” O.D.
 
								




