FFS EF1-110V-A Case-Mounted Welder for UPP Electrofusion Components

$4,706.25 $2,868.46

The EF1 UPP electrofusion unit from Franklin Fueling Systems works with all UPP electrofusion fittings and products. UPP welders feature state-of-the-art electronics which allow for a more compact, user-friendly design.


  • The EF1 welder is IP65 rated and has been tested around the world under exacting site conditions and has proved to be an easy to use, efficient and invaluable addition to the tool box. Its robust construction, dust proof features and enhanced graphic feed‑back of the electrofusion progress, offer real benefit to the operator.
  • The unit’s improved self diagnostic capabilities also ensure increased reliability and tolerance in a variety of climatic conditions. It comes complete with welding leads in a lightweight carry bag for the 230V and a robust case for the 110V.
  • The EF1 unit automatically recognises the fitting when connected with the correct welding cable. It also checks the ambient temperature using a sensor positioned in the housing and adjusts the energy level to balance with the local environment. It then applies the correct amount of energy for a successful weld.

Welding Unit Specifications

Welding Unit Specifications
UPP Stock Code NumberEF1-230VEF1-110V
Operating Voltage230V (+/-15%) AC Supply110V (+/-15%) AC Supply
Operating Frequency40 to 70Hz
Operating Temperature-15° to 45°C (5°F to 113°F)
Shipping Dimensions460mm x 210mm x 210mm420mm x 340mm x 80mm
Shipping Weight3.6 kg (7.9lb)13.24 kg (29.18lb)

This unit is designed to weld UPP pipes and fittings only* and must not be used in conjunction with any other Polyethylene pipework systems. *The UPP systems welder uses a constant current welding system unlike other systems which use constant voltage. Non‑UPP fittings may not be fused correctly with a risk of leakage. Information shown is accurate at the time of going to print. Franklin Fueling Systems reserves the right to change product specifications at any time.

Additional information

Weight 30 lbs
Dimensions 17 × 14 × 8 in

1" double wall cutting tool with (5) blades, 1.5" double wall cutting tool with (5) blades, 1.75" double wall cutting tool with (5) blades, 2" double wall cutting tool with (5) blades, Replacement handle with (5) replacement blades, blade set tool, and handle screws


There are no reviews yet.

Be the first to review “FFS EF1-110V-A Case-Mounted Welder for UPP Electrofusion Components”