A unique application of pressure-driven pumping, the Red Jacket DEF Pump moves the motor from the tank to the sump space, making for hassle-free service to minimize disruption.
The complete Red Jacket® DEF Pump System is comprised of 3 kits:
A pump kit, based on needed pump length, which includes a pump, mounting flange, return pipe, gasket, O-rings, circlip, cover, spider, flange adapters, 5/8″ stainless steel bolt/nut/washer kit, anti-seize, and a manual.
A motor kit, based on needed voltage, includes a motor, lifting hook, thermal overload, splash drains, mounting kit, hardware, coupling, set-point gauge, and a manual.
A manifold kit, Includes a manifold, pressure relief valve, check valve, pressure gauge, tri-clamps, gaskets, tri-clamp to 2″ MNPT adapter, and a manual.
Pair this pump with a magnetic starter and heater combination for seamless motor activation control and thermal protection.
Unique design with motor above tank and removed from flow path delivers 2X more flow than other pressurized DEF pumps above 7 fueling points, contributing to greater than 55% more flow overall.
Stainless steel shaft and core encased in polypropylene provides the optimal balance of structural integrity, corrosion resistance and weight.
Advanced motor engineered to handle more than 30 start/stop cycles per hour for busy sites.
Two thermal overloads provide additional motor protection.
Locating the motor above and outside of the DEF tank eliminates the need to open the tank or break hydraulics during service, saving time and avoiding DEF spillage onto forecourt.
Integrated check valve can be locked down for line tests and service and lifted to drain non-isolated product back into the tank.
Motor does not come into contact with DEF, avoiding risk of overheating or contaminating precise DEF solution.
Avoids opening the tank during motor service, preventing debris or water from entering.
Pump has redundant seals to help prevent DEF contamination.
Pressure management with built-in pressure relief prevents premature nozzle shut-off by maintaining safe line pressures and enables continuous run without motor failure.
Meets ISO 22241 standards for DEF compatibility
Integrates with Veeder-Root® Automatic Tank Gauge, Mag Sump Sensor and Alternative Fluids Probe.
Fuel Compatibility |
*consisting of 32.5% urea and 67.5% de-ionized water
|
Motor Sizing |
|
Line Pressure Relief |
|
Hardware Construction | Return Pipe (Included with Pump): Polypropylene Shaft: Stainless Steel Core Structure: Stainless steel shielded in Polypropylene Impellers: Polypropylene Pump Flange: Polypropylene with EPDM Gasket Manifold Kit: Stainless Steel with EPDM Gaskets |
Protective Coatings |
|
Operation Environment |
|
Length Range | 8’ Tank Standard
10’ Tank Standard
* Minimum 4” clearance from pump bottom to tank bottom |
Check Valve Compatibility |
|
Approvals |
|
Pump Kit
Application | |
Device Characteristics | Vertical Immersion Pressure Pump with Impellers Model DEF640 |
Storage Temperature Range | -22F to +122F (-30C to +50C) |
Tank Flange Interface | 10” ANSI Flange opening required with minimum 10” ID 8 or 12 bolt-pattern compatible 5/8” or 7/8” bolt dimension compatible (5/8” stainless steel fastener set supplied) |
Pump Flange Dimensions | Included with pump 16” OD Reference |
Clearance Requirements | |
Submersion Requirements | Minimum 4” liquid submersion from pump bottom Note: pump cannot run dry or warranty will be invalidated |
Weight | 55-60lbs for 8’ and 10’ standard lengths Weights for other lengths will vary |
Serviceability | Not field serviceable |
Motor Kit
Speed | Rated Speed: 3450 RPM |
Rating-Duty | 40C AMB-CONT |
Duty Cycle | Continuous duty, greater than 30 start/stop cycles per hour |
Dimensions | Vertical Height: 19” Reference Diameter: 12” Reference |
Special Application Features | Drip Cover, Moisture Drains, Integral Thermal Overloads Motor is not to be operated immersed in liquid (must ensure positive motor/pump shut-off by Mag Sump Sensor) |
Weight | 108lbs, lifting hooks included |
Serviceability | Not field serviceable |
Motor Control | For use with magnetic starter VR Part No: 410648-001/003 depending on voltage, and 3 heaters VR Part No: 410649-003/009/011 depending on voltage |
Manifold Kit
Weight | 40lbs |