Menu
Sale!
Veeder Root Dual Point Hydrostatic Sensor
$851.52
The Dual-Point Hydrostatic Reservoir Sensor accurately detects fluid level change in the reservoir and interstice of a double wall storage tank. The Dual-Point Hydrostatic Reservoir Sensor is ideal for high groundwater areas, and can differentiate between a high level alarm condition and a low level alarm condition. If an inner-wall leak occurs, the brine seeps into the tank triggering a low-level alarm, if an outer wall leak occurs, fluid seeps into the interstice triggering a high-level alarm.
Specifications
Fuel Compatibility | Gas, Diesel, Kerosene, Jet Fuel, Aviation Gas, E15, E85, Bio-Diesel 20, Green Diesel, Waste Oil, Motor Oil |
Reservoir Solution Compatibility | Up to 50% ethylene glycol in water; up to 50% propylene glycol in water; salt brine solution of up to 30% CaCl |
Alarm Notification | Normal: Float is in the Center position (correct amount of brine in reservoir) |
Low Liquid: Brine drops below 1.2” (3cm) | |
High Liquid: Brine Rises above 13.13” (33.4cm) | |
Sensor Out: Sensor not communicating to ATG Console | |
Operating Principle | Reed Switch / Float |
Product Activation Height | Low Liquid 1.2” (3cm), High Liquid 13.13” (33.4cm) |
Operating Temp | -13 to +122°F (-25 to +50°C) |
Dimensions | 17.3” (43.9cm) High, 2.5” (6.4cm) in Diameter |
Standard Cable | 12ft (3.65m) |
| Weight | 3 lbs |
|---|---|
| Dimensions | 6 × 4 × 4 in |
| Tank Diameter | 64", 96", 120" |
You may also like…
-
Sale!
-
Sale!
Related products
-
Sale!
-
Sale!
-
Sale!
-
Sale!
Submersible Turbine Pump PartsReplacement Capacitor for Red Jacket STP
$23.20 – $120.15 Select options
