OPW Discriminating Fuel/Water Monitoring Well Sensor

• Innovative – IntelliSense^® makes innovative sensor technology even smarter by communicating the connection status and sensor type to the SiteSentinel^® iSite™or Integra™
   tank gauge.
• Maintenance – IntelliSense™ technology and the SiteSentinel^® iSite™ and Integra™
  tank gauge systems keep track of replaced sensors by recording the sensor’s serial number, along with the date and time of its replacement.
• Compliance – OPW provides a full line of discriminating and non-discriminating sensors to monitor the environment of a fueling facility.
• Savings – The IntelliSense™ technology allows sensors to be multi-dropped during an installation, eliminating a wiring home-run for each sensor.

Discriminating Fuel/Water Monitoring Well Sensor – provides the ability to detect the presence of hydrocarbons floating on the surface of water in a groundwater monitoring well. It’s also able to detect when the water in the monitoring well has dropped below the sensor, making the detection of hydrocarbons no longer possible. The system will alarm indicating that the monitoring well is dry and environmental protection has been compromised. This sensor is used for monitoring wells that are 6 to 20 feet (1.83 to 6.09 meters) deep.

• Part Numbers:
  • 30-0234-HW-06 (6′) (1.83 m)
  • 30-024-MW-15 (15′) (4.57 m)
  • 30-0234-HW-20 (20′) (6.09 m)
• Application: Wet monitoring wells
• Detects: Fuel on Water surface
• Differentiates: Fuel on water or when water drops below sensor
• Product Detection: As little as a 0.1″ (0.25 cm) fuel on water
• Operating Temp:
  • 32°F to 122°F (0°C to 50°C)