Menu
Sale!
Gorman-Rupp SE2K3-E1 115/1 2″ Submersible Dewatering Pump
$1,286.22
| Discharge | 2″ (50 mm) |
| Solids Handling | 0.38″ (10 mm) |
| Casing | Cast Iron |
| Impeller/Rotor | Cast Iron |
| Seal Material | Buna-N |
| Flange | None |
| Drive Type | Electric Motor |
PUMP SPECIFICATIONS
Pump Casing: Gray Iron; Maximum Operating Pressure 26 psi (179 kPa).
Impeller: Gray Iron.
Motor Housing: Stainless Steel 304.
Rotor Shaft: Stainless Steel 304.
Upper and Lower Bearings: Open Single Row Ball.
O_Rings: Buna_N.
Wetted Hardware: Stainless Steel 304.
Lip Seal: Buna_N.
Strainer: Stainless Steel 304, 0.25“ x 0.38” (6,4 x 9,5 mm)
Standard Equipment: Lifting Handle. 2” (51 mm) NPT Discharge Adaptor. Built_In Thermal Overload Protection.
MOTOR/CABLE SPECIFICATIONS
- MOTOR:1 HP; 3400 RPM; 115 Volt, Single Phase, 60 Hz;13 Full Load Amps.
- POWER CABLE:3 Wire; Type STOW (PVC); 14/3 AWG. 2 Power Conductors, 1 Ground. Nominal Length 50 Ft. (15 m)
- RECOMMENDED GENERATOR SIZE:4 Kw.
SEAL SPECIFICATIONS
- Double, Mechanical, Oil Lubricated. Fluorocarbon Elastomers (DuPont Viton or Equivalent).
- Upper Faces: Carbon and Ceramic Rotating and Stationary Faces.
- Lower Faces: Silicon Carbide and Ceramic Rotating and Stationary Faces.
- Maximum Temperature of Liquid Pumped, 104F (40C).
| Weight | 60 lbs |
|---|---|
| Dimensions | 18 × 8 × 8 in |
Related products
-
Sale!
-
Sale!
-
Sale!
