- Design requires only a single 2.75” entry hole offering a significant reduction in installation time.
- Features a dual-seal design that will work with either galvanized or coated conduit.
- Suitable for use with flat and round sump surfaces and polyethylene or fiberglass sumps.
- A clamp plate and two gasketed seals ensure a watertight connection.
APT Rigid Electrical Conduit Entry Boot
$143.76 – $153.04
APT™ brand rigid entry boots allow you to connect electrical conduit to containment sumps with a significant reduction in installation time, while also completely removing exposed rubber from the connection. This durable entry boot requires only a single 2.75” entry hole for installation, removing the time-consuming process of drilling multiple holes for fastening purposes.
A clamping nut and two clamping seals are used to compress the fitting into place against the sump wall simply by tightening it into place, providing a watertight connection between the boot and the sump surface. The same method is used to seal the pipe into place simply by tightening the integrated conduit seal nut. The interior pipe seal then compresses on to the pipe, providing another watertight connection between the boot and pipe.
|Dimensions||4 × 4 × 4 in|
Rigid entry boot ¾" conduit/ flat surface, Rigid entry boot 1" conduit/ flat surface, Rigid entry boot ¾" conduit/ round surface, Rigid entry boot 1" conduit/ round surface